GKS-01

 

		They are 7 segmented LED indicator equipped digital controllers which can be connected with the GY sensor probe directly. Output the serial (standard) and parallel (option) has prepared 2 types. Indication other than 0.1mm of standard, with scaling function %, setting of inch and the like is possible. In addition, point output (the open collector) the signal can be set to 10 points.

Specifications

Indication 6 columns, red 7 segmented LED letter height 15mm Indicatory range: 999999 - 99999 Decimal point position: Option setting Scaling function % In inch and the like setting possibility Combination probe GYcRS, GYMR4S and GYKM-RS probe (Note 1) Supply power source +12V - +24VDC below ±10% 4W Pre-setting 1 point setting possibilities Serial output RS232C or RS485 Parallel output (Note 2) BCD/binary/Gray (change possibility) Sampling frequency 30 - It differs 100Hz (depending upon point output working condition) Point output Open collector 30V 20mA or less 10 points Category temperature range 0℃ - 45℃ Storage temperature range -20℃ - 70℃ Humidity range 20 - 90%RH (there is no dew condensation,) Weight GKS-01-SN… approximately 330g GKS-01-SP… approximately 380g

Note 1) GYcRS, GYMR4S and the GYKM-RS probe are the GKA-01 private probe. (External size is the same as GYcRP, GYMR4 and GYKM-LT. ) Note 2) Parallel output is manufacturer option. Please appoint beforehand.

Type Variations
		Output
		SN: Only serial output SP: Parallel coming out regaining one's strength

* The output connector belongs respectively.
* Parallel output it is manufacturer option, please appoint beforehand.

External Dimensions Drawing

	Case material ABC resin (Glass fiber entering)