GYcRP (digital)

 

		As for GYcRP and the GYHR probe, it can obtain digital output by combining with the GYDC-03A controller. It is something which it measures by counting the propagation delay time of the magnetostriction signal with the 50MHz clock and digitizes. Standard output of the GYDC-03A controller parallel 19Bit binary, is resolution 0.1mm. If it operates with high resolution mode, it can obtain the resolution of 10 millimicrons. This GYDC-03A controller has loaded the Μ processor, we make zero point sets and the output etc of the Gray code possible. In addition, it corresponds to also special specification such as multi inspection coming out and serial output.

 

Specifications

●GYDC-03A

Application sensor probe GYcRP or GYHR probe Efficiency Resolution 0.1mm (option 0.01mm) Responsiveness Scanning frequency approximately 1kHz (standard) Power form Output level Open collector output 50V 0.15A (Option TTL output) Output logic Negative logic (option positive logic) Output cord/code Binary output (maximum 19bit) (standard) BCD output (maximum 19bit) Gray output (maximum 19bit) Power source 85 - Below 132VAC 20W Environmental characteristic Input HOLD Data latch input signal (+24V) (Option TTL level) ZEROSET Zero set signals Output DD0 - DD18 Data output signal FLAG Sign signal of data STB Handshake signal

* In combination with power form and the like to the specification of user, after setting at our company factory, it is shipped. * Please choose the magnet from No.φ, No.2P and No.11 etc.

Type Variations
		Effective stroke (mm)
		Digital output
		Non entry: Standard (open collector) T: TTL output P: Photo isolation
		Option
		VP: Analog position output VV: Analog speed output VL: Analog degree of crawling output MM: Multiple magnet
		Analog output
		A: Voltage output (- 10V - +10V) B: Electric current output (4mA - 20mA)
		Special specification (VER. )
		2V: Power supply voltage 200V

 

As for *1 analog output, either voltage or electric current 1 outputs.
In case of the *2 option attachment, by all means special number is necessary.

External Dimension Drawing

●GYDC-03A controller