GYDC-05

		The GYDC-05 controller position of the magnet digital output (parallel) of resolution 1 millimicron, is the new model controller which achieves the analog output of position or speed (option) simultaneously. Also SSI output and incremental output are possible with option. Because the DIN rail is utilized in the installation of the product, installation and the removal are easy.Combining, as for the probe which you can use GYcRS, GYMR5, GYFRS and GYGS It is GYPM, GYHR, GYcRP and GYMR4.

Specifications

Standard Option Digital position output Phase connector (the Sumitomo 3M corporation make) 10136-3000PE attaching Parallel Binary (with user to Gray modification possibility) Negative logic (at the time of TrON output “1”) Incremental output addition SSI output addition Resolution: 0.01mm/bit (It combines, probe GYcRS, MR5 and FRS) 0.1mm, 0.05mm and 0.002mm 0.001mm/bit Resolution: 0.1mm/bit (It combines, probe GYGS, PM, HR, cRP and MR4) - Analog position output (OUT1) 0 - 10VDC (Load current Max5mA, load resistance Min2kΩ) 4 - 20mA (load resistance Max500Ω) and the like Resolution: 16bit (1/65536) (It combines, probe GYcRS, MR5 and FRS) Resolution: 0.01%FS (It combines, probe GYGS, PM, HR, cRP and MR4) Analog speed output (OUT2) (Note 1) - ±10V or 4 - 20mA

Supply power source +24VDC±5% (below 160mA) Alarm output Open collector 0.1A 30VDC (cable broken wire and magnetic end) Scanning frequency 1kHz (to stroke 1000mm) Temperature characteristic ±10ppmFS/℃ Category temperature range 0 - +65℃ Storage temperature range -20 - +75℃

* The above-mentioned precision is applied to the sensor above effective stroke 300mm. (Note 1) in addition to position output, it is speed output additional option. ±10V: At the time of magnetic stop to 0V and probe point when moving +10V. 4 - 20mA: At the time of magnetic stop regardless of to 4mA and portable direction 20mA.

Type Variations
	Digital output
	1: Standard (parallel output and negative logic binary) 2: Incremental it comes out and regains one's strength (250kHz) 5A: Asynchronous SSI coming out regaining one's strength 5S: Synchronous SSI output being attached
	Resolution
	D2: 0.1mm D3: 0.05mm D4: 0.01mm (standard) D7: 0.002mm D8: 0.001mm
	Output direction
	D: Magnet to point when moving increase R: The magnet to the point when moving decrease (when there is no appointment, @AB 1-D4D [or 1-D2D] it becomes)
	Probe type
	Sign Probe type Sign Probe type RS GYcRS GS GYGS (as for resolution only D2) R5 GYMR5 PM GYPM (as for resolution only D2) FS GYFRS HR GYHR (as for resolution only D2) RP GYcRP (as for resolution only D2) R4 GYMR4 (as for resolution only D2)
	Effective stroke (mm)
	You follow largest effective stroke probe specification.
	Basis dead zone size (mm)
	You follow basis dead zone size probe specification.
	Analog position output (OUT1)
	Sign Output AD 0 - 10V (standard) AR 10 - 0V BD 4 - 20mA BR 20 - 4mA CD or CR□□ Bipolar output (Example) CD10 CD05 CR10 □□V - □□V -10V - +10V -5V - +5V +10V - - 10V VZ/F (Example) V1/5 V0.5/9.5 Designated value voltage 1 - 5V 0.5V - 9.5V IZ/F (Example) I5.12/20 I20/5.38 Designated value electric current 5.12 - 20mA 20 - 5.38mA * Z= zero point (basis) output F= full scale point (point) output
	Option: Analog output (OUT2)
	In case of position and output, it selects from F Speed in case (Note 1) of output VA [] ±10V WB [] 4 - 20mA 　　　[]: Maximum path velocity (1.00 - 999mm/sec) < 3 column significant digits, as for decimal point with R inscription > N: Option unnecessary
	Magnetic or float form
	Sign Magnetic type Sign Float type M0 No.0 F28S φ28SUS316 M0SM No.0SPM F30S φ30SUS316L M0LM No.0LPM F40S φ40SUS316(B) M2P No.2P F42S φ42.5 sphere SUS316 M2PN No.2PN F50S φ50SUS316 M3 No.3 F54S φ54SUS304 M11 No.11 F25N RF-A10 plastic float M11N No.11N F28N RF-A6 plastic float T142 No.T14-M2 FL□ Float other than describing T144 No.T14-M4 T162 No.T16-M2 T163 No.T16-M3 MG□ Magnet other than describing
	(Note 1)
	VA at the time of magnetic stop when moving +10V is to 0V and the probe point. WB at the time of magnetic stop is 20mA regardless of to 4mA and portable direction.

External Dimensions Drawing

●GYDC-05 controller