Specifications
|
GYFRS
Flange Head, Robust The GYFRS is a probe that improves the vibration-proof and the impact-proof performance. Vibration-proof 10G and impact-proof 200G (2msec) have been achieved. The output signal is compatible with the GYcRS probe, and it is available by combining with GYDC-05 in the digital output and with GYHC, GYFC2 in the analog output for the controller. Moreover, it is possible to combine with digital output (GKS-01) with indicator. The flat head permits a miniaturized application and the flange makes the installation easier, compared with a conventional screw type. Model Selection
|
Dimensions
Material probe head: SS304, probe rod: SS304
Standard magnet: No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
CN type: Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic),
WPCN type: Tajimi TC1108-12A10-7F (8.6) (Material:brass with Ni plating)
The figure in < > is the figure of IP68 type (WPCN, WPG*).
Applicable O ring type is P-14. Back-up ring is strongly suggested in usage.
Standard magnet: No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
CN type: Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic),
WPCN type: Tajimi TC1108-12A10-7F (8.6) (Material:brass with Ni plating)
The figure in < > is the figure of IP68 type (WPCN, WPG*).
Applicable O ring type is P-14. Back-up ring is strongly suggested in usage.