GYHC

 

		As for the GYHC controller position and speed of the magnet (option) 0 - 10V or it is the controller which is output with 4 - 20mA. Unlike the former analog output controller, it processes high resolution digitally in inside, converts this position data to analog and outputs. Because of this a higher resolution than past has become possible. (It combines and depends on the probe) Because the DIN rail is utilized in the installation of the product, installation and the removal are easy.Output adjustment method not to be former volume adjustment, because it is toggle switch system on the front panel, fine control has become easy.Combining, as for the probe which you can use GYcRP, GYcRS, GYFRS and Ex-GYdT, Ex-GYdS, GYMR4 and GYMR5, It is GYPM, GYGS and GYHR.

 

Specifications

Supply power source Standard +24VDC±5% (below 150mA) Option +15VDC±5% (below 250mA) Position output 0 - 10V and the like (load current Max5mA, load resistance Min2kΩ) Or 4 - 20mA and the like (load resistance Max500Ω) Alarm output Open collector 0.1A 30VDC (cable broken wire and magnetic end) Scanning frequency 1kHz (to stroke 1000mm) Position output resolution Combination probe GYcRS, GYMR5 and GYFRS 16bit (1/65536) Combination probe GYGS, GYPM, GYHR, GYcRP and GYMR4 0.01%FS Speed output (option) (Note 1) ±10V or 4 - 20mA Temperature characteristic ±10ppmFS/℃ Category temperature range 0 - +65℃ Storage temperature range -20 - +80℃

* The above-mentioned precision is applied to the sensor above effective stroke 300mm. (Note 1) in addition to position output, it is speed output additional option. ±10V: At the time of magnetic stop to 0V and probe point when moving +10V. 4 - 20mA: At the time of magnetic stop regardless of to 4mA and portable direction 20mA.

Type Variations
	Probe type
	Sign Probe type Sign Probe type RS GYcRS PM GYPM R5 GYMR5 HR GYHR FS GYFRS RP GYcRP GS GYGS R4 GYMR4
	Effective stroke (mm)
	You follow largest effective stroke probe specification.
	Basis dead zone size (mm)
	You follow basis dead zone size probe specification.
	Position output (OUT1)
	Sign Output AD 0 - 10V AR 10 - 0V BD 4 - 20mA BR 20 - 4mV CD or CR□□ Bipolar output (Example) CD10 CD05 CR10 □□V - □□V -10V - +10V -5V - +5V +10V - - 10V VZ/F (Example) V5/1 V1/5 V0.5/9.5 Designated value voltage 5 - 1V 1 - 5V 0.5V - 9.5V IZ/F (Example) I5.12/19.34 I20/5.38 Designated value electric current 5.12 - 19.34mA 20 - 5.38mA * Z= zero point (basis) output F= full scale point (point) output
	Option output (OUT2)
	In case of position and output, it selects from C Speed in case of output (Note 1) VA [] ±10V WB [] 4 - 20mA 　　　[]: Maximum path velocity (1.00 - 999mm/sec) < 3 column significant digits, as for decimal point with R inscription > N: Option unnecessary
	Supply power supply voltage
	Sign Supply power supply voltage 24S +24VDC (standard) 15S +15VDC (option: There to be restriction depending upon combination probe type and length, other way please inquire.)
	Magnetic or float form
	Sign Magnetic type Sign Float type M0 No.0 F28S φ28SUS316 M0SM No.0SPM F30S φ30SUS316L M0LM No.0LPM F40S φ40SUS316(B) M2P No.2P F42S φ42.5 sphere SUS316 M2PN No.2PN F50S φ50SUS316 M3 No.3 F54S φ54SUS304 M11 No.11 F25N RF-A10 plastic float M11N No.11N F28N RF-A6 plastic float T142 No.T14-M2 FL□ Float other than describing T144 No.T14-M4 T162 No.T16-M2 T163 No.T16-M3 MG□ Magnet other than describing
	(Note 1)
	VA at the time of magnetic stop when moving +10V is to 0V and the probe point. WB at the time of magnetic stop is 20mA regardless of to 4mA and portable direction.

External Dimensions Drawing

●GYHC controller